Oil Spill Gulf of Mexico 2010 | Submit your complaints and let your voice be heard!

BP Complaints



Statement from Admiral Allen on the Successful Installation of the Replacement BOP 0

Posted on September 04, 2010 by bp complaints

Key contact numbers

  • Report oiled shoreline or request volunteer information: (866) 448-5816
  • Submit alternative response technology, services or products: (281) 366-5511 
  • Submit a claim for damages: (800) 916-4893
  • Report oiled wildlife: (866) 557-1401

Deepwater Horizon Incident
Joint Information Center

Phone: (713) 323-1670
(713) 323-1671

Statement from National Incident Commander Admiral Thad Allen on the Successful Installation of the Replacement BOP

“Under the direction of the federal science team and U.S. government engineers, BP used the Development Driller II to successfully install a fully functioning and tested Blow Out Preventer (BOP) on the cemented Macondo 252 well. Earlier today, BP lifted the damaged BOP, which will now be lifted to the surface and recovered. During the period of time between the removal of the damaged BOP and installation of the replacement BOP, there was no observable release of hydrocarbons from the well head. This procedure was undertaken in accordance with specific conditions I set forth last week in a directive authorizing this procedure. This is an important milestone as we move toward completing the relief well and permanently killing the Macondo 252 well. I will continue to provide updates as necessary.”

To view Admiral Allen’s Aug. 27 directive authorizing the commencement of the removal procedures, click here.

Recent Updates for Unified Command for the Deepwater BP Oil Spill | Deepwater Horizon Response

Sealing Cap Installation Update 0

Posted on July 11, 2010 by bp complaints

BP press releases

Video of LMRP Cap Installation Process. (DeepwaterHorizonJIC) 0

Posted on June 03, 2010 by bp complaints

Author: InternationalNews09
Keywords:
Added: June 3, 2010

YouTube :: Tag // deepwaterhorizonjic.

Video of LMRP Cap Installation Process 0

Posted on June 03, 2010 by bp complaints

As work continues to install the LMRP cap, this video animation illustrates how it will be connected to the drillship riser, prepped, maneuvered into position and installed on top of the BOP stack.
Uploads by deepwaterhorizonjic.

Riser cut explained – BP prepares for the Lower Marine Riser Package Cap (LMRP) installation 0

Posted on June 02, 2010 by bp complaints

HOUSTON – BP prepares for the Lower Marine Riser Package Cap (LMRP) installation, a method that may help contain the flow of oil from the well until the permanent relief well is drilled. This video illustrates the the removal of a section of the riser. Video courtesy of BP.
Uploads by deepwaterhorizonjic

BP prepares for the Lower Marine Riser Package Cap (LMRP) installation 0

Posted on June 02, 2010 by bp complaints

HOUSTON – BP prepares for the Lower Marine Riser Package Cap (LMRP) installation, a method that may help contain the flow of oil from the well until the permanent relief well is drilled. This video illustrates the diamond bladed cutter being moved into position to make the second critical cut. Video courtesy of BP.
Uploads by deepwaterhorizonjic



↑ Top